FRG-7 tuning LED replacement and IF SSB filter

FRG-7 communication receiver

In the late 1970s, Yaesu’s FRG-7 communication receiver was a real step forward. It covers Long Wave through to 30MHz in 1Mhz chunks using the Wadley Loop system to synthesize the frequency with negligible drift which my previous receiver the Trio 9R-59DS certainly suffered from!

After selecting the band you ‘tune in’ the MHz bit using the Loop Lock LED to establish the ‘lock’ and then use the RF preselector to peak sensitivity for the desired band.

Around 2010, I did the mod to change the LED to a red/green LED so that it was clearer when you had or hadn’t got lock for the Mhz you required. There are a few methods for doing this mod which are available on the web. The method that seems clearest to follow is at http://www.monitor.co.uk/radio-mods/frg-7/frg-7-mhz-lock-red-green-led-mod.htm  (I saved the page here just in case it changes at some point:- MonitorInternet-RadioModifications-FRG-7-MHz-Lock-Red-Green-LED-Mod)

I also did the SSB filter mod which adds a 2.6kHz bandwidth filter as described in Shortwave Magazine in Feb 1981:-

FRG-7-narrow-filter-page-1

FRG-7-narrow-filter-page-2

I wanted to do the transceiver mod to the receiver, described by Ian Keyser G3ROO, which was an ingenious idea and would have been great to achieve but unfortunately the semiconductors required to do this had disappeared by the time the idea came to mind. I then wondered if I could use the FRG-7 oscillator as the basis of a transmitter just on one band but that seemed too tricky to achieve. In the end I decided to build an AM transmitter for topband to accompany the radio and so I built the Walford Cam (on steroids in the PA department!). PTT on the transmitter grounds the FRG-7 Mute connector making this an easy match to make.

Walford Cam - AM transmitter for 160m - front view

Manuals and notes
FRG-7-and-mods